Touch buttons, sliders and wheels are usually used in touch applications that are based on PCBs or flexible films, that look like this:

In order to design your Layout, you can combine any of the button/slider/wheel templates that are currently supported:

  • Circular Button: This is the most common shape of a touch button.

Radius: 0.1-100 mm.

In case you want to add a hole, inner radius (0.1-100 mm) is also needed:

  • Rectangular Button: Width (0.1-100 mm) and height (0.1-100 mm) are needed.

You can also add a hole inside (inner radius is needed, 0.1-100 mm) and/or rounded corners (edge radius is needed, 0.1-100 mm):

  • Chevron Segments Slider

Width: 0.1-100 mm
Height: 0.1-100 mm
Gap: 0.001-10 mm
Angle: 10-170 deg
Number of segments: 2-50

  • Diagonal Segments Slider

Width: 0.1-100 mm
Height: 0.1-100 mm
Gap: 0.001-10 mm
Angle: 10-170 deg
Number of segments: 2-50

  • Wheel Wedged Electrodes

Inner radius : 0.1-100 mm
Outer radius: 0.1-100 mm
Inner gap: 0.001-100 mm
Outer gap: 0.001-100 mm
Number of segments: 3-50

Did this answer your question?